Home > Knowledge > Content
Introduction of S32205
Jul 03, 2017

Grade 2205 stainless steel is a duplex stainless steel whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Grade 2205 stainless steel resists sulfide stress corrosion and chloride environments.

 

Chemical Composition

The chemical composition of grade 2205 stainless steel is outlined in the following table.

Element

Content (%)

Iron, Fe

63.75-71.92

Chromium, Cr

21.0-23.0

Nickel, Ni

4.50-6.50

Molybdenum, Mo

2.50-3.50

Manganese, Mn

2.0

Silicon, Si

1.0

Nitrogen, N

0.080-0.20

Carbon, C

0.030

Phosphorous, P

0.030

Sulfur, S

0.020

 

Mechanical Properties

The mechanical properties of grade 2205 stainless steel are displayed in the following table.

Properties

Metric

Imperial

Tensile strength at break

621 MPa

90000 psi

Yield strength (@strain 0.200 %)

448 MPa

65000 psi

Elongation at break (in 50 mm)

25.0 %

25.0 %

Hardness, Brinell

293

293

Hardness, Rockwell c

31.0

31.0

 

Equivalent materials to grade 2205 stainless steel are:

  • ASTM A182 Grade F51

  • ASTM A240

  • ASTM A789

  • ASTM A790

  • DIN 1.4462

     

    Annealing

Grade 2205 stainless steel is annealed at 1020-1070°C (1868-1958°F) and then water quenched.

Hot Working

Grade 2205 stainless steel is hot worked in the temperature range of 954-1149°C (1750-2100°F). Hot working of this grade stainless steel under room temperature is recommended whenever possible.

 

Welding

Welding methods recommended for grade 2205 stainless steel include SMAW, MIG, TIG and manual covered electrode methods. During the welding process, the material should be cooled below 149°C (300°F) between passes and preheating of the weld piece should be avoided. Low heat inputs should be used for welding grade 2205 stainless steel.

Forming

Grade 2205 stainless steel is difficult to form due to its high strength and work hardening rate.

Machinability

Grade 2205 stainless steel can be machined with either carbide or high speed tooling. The speed is reduced by about 20% when carbide tooling is used.

 

Applications

Grade 2205 stainless steel is used in the following applications:

  • Flue gas filters

  • Chemical tanks

  • Heat exchangers

    Acetic acid distillation components

2205 stainless steel   2205 stainless steel